Panasonic S-ICX Technical Manual page 12

Chapter 1. About This Manual
Purpose
The purpose of this manual is to provide an overview of feature operations and requirements. Where
applicable, the following types of information are provided for each feature:
Types of Information
Description
Operation
Hardware Requirements
Related Programming
Considerations
Abbreviation List
ACD Automatic Call Distributor
ARS Automatic Route Selection
BGM Background Music
BLF Busy Lamp Field
BRI Basic Rate Interface
CFWD Call Forward
COS Class of Service
CTI Computer Telephony Integration
DDI Direct Dial Inward
DID Direct Inward Dialing
DIL Direct In Line
DISA Direct Inward System Access
DL Direct Line
DN Directory Number
DND Do-Not-Disturb
DP Dial Pulse
DSLT Digital Single Line Telephone
DSS Direct Station Selector
DSU Digital Service Unit
DTMF Dual Tone Multifrequency
FF Flexible Function
HD High Density
LCD Liquid Crystal Display
LCR Least Cost Routing
MCO Multiple CO (Pooled Trunk Access)
MIS Management Information System
MOH Music On Hold
PNPDNPhantom Non-Primary Directory Number
PRI Primary Rate Interface
PSD Personal Speed Dial
SLT Single Line Telephone
SMDR Station Message Detail Recorder
SPI Service Provider Interface
SSD System Speed Dial
TRS Toll Restriction Service
12
Purpose
Provides an overview of how the feature works and,
in some cases, what it is typically used for
Includes step-by-step instructions on how to use the
feature
Lists any special hardware that is required to use the
feature
Lists the programming subsystems associated with
the feature
Provides details on feature interactions and limita-
tions
S-ICX (International) issued October 2000
Section 700 - Operation
S-ICX-50-700