Panasonic S-ICX Technical Manual page 106

Chapter 4. User Maintenance
To set SSD names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 02.
3. Press the HOLD key.
4. Enter 1.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter the SSD bin number (00-79 or 000-799).
8. Press the HOLD key.
9. Enter the SSD name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
10. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
11. Repeat steps 9-10 as many times as necessary to enter the
desired SSD name.
Note: Press the FL/R key to clear the entire entry.
12. Press the HOLD key to store the entry.
13. To set additional SSD names, press the volume up or down
key or press the HOLD key to move to the desired SSD.
14. Repeat steps 9-13 until all SSD names are entered.
15. Press the MEMORY key to exit the entry mode.
16. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
106
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
81-
User MAINT displays
8102-
SSD Assignment displays
1 :
SSD Name displays
Enter SSD # displays
A B C D E F XXX displays (where
XXX = SSD bin number)
Next SSD bin number displays
Desired SSD bin number displays
Enter SSD # displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
S-ICX-50-700