Chapter 5. Key Telephone Features
3. Press the MEMORY key.
OR...
Enter the Speed Dial Originate code (default = 80).
4. Enter the PSD bin number (80-99).
5. Complete the call and replace the handset or press the ON/
OFF key.
To check a PSD number:
1. Lift the handset or press the ON/OFF key.
2. Press the CONF key.
3. Press the MEMORY key.
4. Enter the PSD bin number (80-99).
5. If you want to check the next PSD number, press the HOLD
key.
6. Replace the handset or press the ON/OFF key.
To delete a PSD number:
1. Lift the handset or press the ON/OFF key.
2. (A) Press the PROG key.
(B) Press the MEMORY key.
OR...
(A) Enter the Speed Dial Set/Clear code (default = 710
[UK/HK] or 710# [Taiwan, Malaysia, Indonesia]).
3. Enter the PSD bin number (80-99).
4. Press the HOLD key.
5. Replace the handset or press the ON/OFF key.
Hardware Requirements
•
N/A
Considerations
•
PSD number can be dialled from One-Touch keys. (For additional information, see "One-Touch
Keys" on page 179.)
•
Storing a new number erases any previously stored data.
•
If the called party's number and name are stored in the PSD code, that information appears on the
display when you use the speed dial code.
188
Action
Action
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Result
Intercom dial tone
C displays
Programmed data displays
Result
Intercom dial tone
Cleared Spd Dial displays
S-ICX-50-700