Panasonic S-ICX Technical Manual page 82

Chapter 4. User Maintenance
Some bushiness may have special operating hours based on the day of the month. For instance, a
company may work half-days on the second Saturday of each month.
Operation
To set the Day of Week Modes:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 07.
3. Press the HOLD key.
4. Enter 3.
5. Press the HOLD key.
6. Press the HOLD key.
7. Enter pattern (0 - no pattern, 1 - pattern 1, 2 - pattern 2, 3 -
pattern 3) for the first Sunday.
Note: To clear an entry or existing data, press the
key.
8. Press the HOLD key to store the entry.
9. To set additional Day of Week modes, press the volume up
or down key or press the HOLD key to move to the desired
mode.
10. Repeat steps 7-9 until the remaining days in the month are
set.
Note: The entry positions are listed in Table 10 on page 83.
MEMORY
11. Press the
12. To return to the top menu level (81), press the PROG key.
OR...
To exit the User Maintenance mode, press the ON/OFF
key.
82
Action
FL/R
key to exit the entry mode.
S-ICX (International) issued October 2000
Section 700 - Operation
Result
81-
User MAINT displays
8107-
System Mode displays
3-
D of Week PTN displays
300 :
1st SUN Pattern displays
Next Day of Week mode displays
Desired Day of Week mode displays
3-
D of Week PTN displays
81-
User MAINT displays
OR...
ON/OFF LED goes off
S-ICX-50-700