Trunk Queuing - Panasonic S-ICX Technical Manual

Section 700 - Operation
Operation
To seize an idle trunk:
1. Lift the handset or press the ON/OFF key.
2. Enter the Trunk Access Number (default = 9 [UK/HK, 0
[Taiwan, Malaysia, Indonesia], or 81-84). (See Table 20.)
3. Dial the phone number.
Hardware Requirements
• N/A
Considerations
• The System supports up to 576 outside lines in a six-CCU configuration. These lines can be
divided into 99 different trunk groups.
• Each trunk group can support up to 50 outside lines.
• Each MCO Tenant Group can have up to 5 MCO trunk access codes. System defaults for MCO
trunk access codes are displayed in the following table.
• MCO1 can have up to 5 trunk groups assigned by the Advanced Trunk Group feature.
• MCO1 access code is used for Automatic Route Selection (ARS) access code.
Table 20. MCO Trunk Access Codes
MCO Group
MCO1
MCO2
MCO3
MCO4
MCO5

Trunk Queuing

Description
When you try to originate a call by MCO (enter
all outside lines in a trunk group are busy, the System can call you when a line becomes free. Simply
pick up the handset and dial the telephone number when the Trunk Callback alert tone rings.
S-ICX-50-700
Action
Trunk Access Code
9 (UK/HK) or 0 (Taiwan,
Malaysia, Indonesia)
81
82
83
84
S-ICX (International) issued October 2000
Chapter 5. Key Telephone Features
Intercom dial tone
• Outside dial tone
• CO XXX displays (where XXX = trunk
number)
Dialled phone number displays
[UK/HK] or [Taiwan, Malaysia, Indonesia]) and
9 0
Result
203