Set Extension Names - Panasonic S-ICX Technical Manual

Section 700 - Operation
Hardware Requirements
• N/A
Considerations
• N/A

Set Extension Names

Description
You can assign names to each extension, even if the extension is not a display telephone. When the
extension is called, the name appears on the display. For more information on the digital key
telephone display, see "Display Information" on page 152.
Operation
To set extension names using either a large-display or small-display phone:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 75.)
2. At the 81 level, enter 03.
3. Press the HOLD key.
4. Press the HOLD key.
5. Press the HOLD key.
6. Dial the extension number.
7. Press the HOLD key.
8. Enter the extension name:
• If using a large-display phone, press the soft key next
to the desired row of letters. (See Example 1 on page
91.)
• If using a small-display phone press the appropriate
one-touch key. (See Example 2 on page 92.)
Note: Press the FL/R key to clear any existing data.
9. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-Display Phone on page 91.
• See Example 2. Small-Display Phone on page 92.
Notes:
• Press the * key to erase a single entry.
• Press the # key to enter a space.
S-ICX-50-700
Action
S-ICX (International) issued October 2000
Chapter 4. User Maintenance
Result
81-
User MAINT displays
8103-
Extension Name displays
0 :
EXT Number/Name displays
Enter EXT # displays
A B C D E F XXX displays (where
XXX = extension number)
85