Intercom Calling; Redial - Panasonic KX-HTS824 Feature Manual

3.2.6 Intercom Calling

Description
An extension user can call another extension user.
About the floating extension number
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station. These numbers are defined as floating extension numbers and can be
assigned as a group extension number etc. Floating extension numbers can be dialed by an extension user.
Important
FWD No Answer Time is used as the timer for forced call disconnection. For more information, refer to
3.1.9 Call Forwarding (FWD).
Conditions
Extension numbers and names are assigned to all extensions.
After dialing an extension number, the following tone is heard on the
caller side.
•
Ringback tone: Indicates a connection is being made to the called
extension
•
Busy tone: Indicates the called extension is busy / Indicates the
dialed extension number is invalid
When a call is received at an extension, the extension number and
name which made the call are indicated at the extension which
receives the call.
Through system settings, it is possible to make an intercom call by
pressing the DSS key without going off-hook.
2.2.5 PBX Configuration—[1-5] System—Timers
2.3.1 PBX Configuration—[2-1] Extension—Port
2.3.3 PBX Configuration—[2-3] Extension—Flexible Buttons

3.2.7 Redial

Description
Every extension automatically saves recently dialed external telephone numbers to allow the same number
to be dialed again easily.
Operation
For all Extensions:
Enter the redial feature number while a dial tone is heard.
(Refer to 2.1.1 Feature Number Lists for User)
For KX-HDV series SIP phones:
Press the [REDIAL] button while a dial tone is heard.
Conditions
PIL Reference
3.2.6 Intercom Calling
Note
Refer to 4.1 DSS Key
Feature Manual 41