Intercom Calling - Panasonic KX-TD1232E Installation Manual

I
I
ntercom Calling
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
3-94 Features
Allows the extension user to call another extension user within the
system.
• Extension numbers are assigned to all extensions by system
programming. An extension number is programmed to be two, three, or
four digits. The ISDN extension number is programmed to be one, two
or three digits.
• Names can be given to extension numbers by system programming.
An extension number and a name, if programmed, is shown on the
display PT during an intercom call.
• DSS buttons permit one-touch access to an extension and provide Busy
Lamp Field.
• KX-T7235, KX-T7431, KX-T7433 and KX-T7436 users can make an
extension call with an extension dialling directory on the display.
• After dialling an extension number, the user will hear one of the
following:
Ringback tone: indicates that the other extension is being called.
Confirmation tone: indicates that the user can perform Voice
Calling.
Busy tone: indicates that the other extension is busy.
Do Not Disturb tone: indicates that the other extension has
DND assigned.
Section 4, System Programming,
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[012] ISDN Extension Number Set
[013] ISDN Extension Name Set
[017] TD286 Extension Number Set
[018] TD286 Extension Name Set
[100] Flexible Numbering, 1st through 16th hundred extension blocks
Station Programming.......................................................User Manual,
Customising the Buttons – DSS Button
Section 3, Features,
Busy Lamp Field
Operation – Making Calls
Basic Calling – Calling another extension
3 Features
Button, Direct Station Selection
(DSS)