Network Transfer Recall; Tandem Connection; Non-Blocking Architecture; Power On Maintenance - Panasonic S-ICX Technical Manual

Chapter 3. System Features

Network Transfer Recall

Network Transfer Recall allows a call which has been transferred to another node to recall back to the
transferring extension.

Tandem Connection

Tandem Connection allows calls that are received over the network tie lines to be automatically routed
on to another PBX or out to the public network.
Hardware Requirements
• T1 (USA), E&M (HK) or AC-15 (UK) Card
Considerations
• N/A

Non-Blocking Architecture

Description
The System is totally non-blocking. All extension and outside lines are available for use at the same
time.
Hardware Requirements
• The CPC-HS supports 64 ports (max. 28 extensions and 24 digital extension ports). The CPC-
HM supports up to 116 ports (max. 60 extensions and 24 digital extension ports).
Considerations
• N/A

Power On Maintenance

Description
The System allows you to change most circuit cards, programming, and many other maintenance
features while the System is powered on and operating. Very few operations require the System to be
powered down or out of service. The System therefore continues to operate without interruption for
most maintenance functions.
A limited number of items such as the replacement of some common control circuit cards requires the
system to be powered down.
Hardware Requirements
• N/A
54 S-ICX (International) issued October 2000
Section 700 - Operation
S-ICX-50-700