RIP fan removal
See
"RIP fan" on page 7-41
1.
Remove the top cover assembly. See
2.
Remove the rip fan screw type
3.
Disconnect the rip fan cable from the engine board at connector J53.
4.
Remove the rip fan.
RIP board shield assembly removal
"RIP board shield assembly" on page 7-37
1.
Remove the top cover assembly. See
2.
Remove the rear fan cover. See
3.
Remove the rear cover. See
4.
Remove the RIP board. See
5.
Remove the transfer HVPS board. See
6.
Remove the RIP board shield assembly mounting screws (A) through the holes in the shield.
7.
Remove the RIP board shield assembly.
for the part number.
"Top cover assembly removal" on page
"324"
(A).
for part number.
"Top cover assembly removal" on page
"Rear fan cover removal" on page
"Rear cover removal" on page
"RIP board removal" on page
"Transfer HVPS board removal" on page
4-5.
4-5.
4-8.
4-8.
4-70.
4-80.
Repair information
5060-00x
4-71