Itu Drive Motor Removal; Low Voltage Power Supply (Lvps) Removal - Lexmark 13P0195 - C 750dn Color Laser Printer Service Manual

5060-00x

ITU drive motor removal

See "ITU drive motor, SKC" on page 7-27
1.
Remove the RIP board shield assembly. See
2.
Remove the engine board shield. See
3.
Remove the ITU drive motor mounting screws (B), disconnect cable (A), and remove the assembly.

Low voltage power supply (LVPS) removal

See
1.
Remove the rear fan cover. See
2.
Remove the fuser top duct. See
3.
Remove the LVPS screw type
4-38
Service Manual
"LVPS, 115V" on page 7-35
"Rear fan cover removal" on page
"Fuser top duct removal" on page
"121" (A) from the rear of the printer.
for the part number.
"RIP board shield assembly removal" on page
"Engine board shield removal" on page
or "LVPS, 220V" on page 7-35
4-71.
4-30.
for the part number.
4-8.
4-34.