Configuration Menu
The Configuration Menu (CONFIG MENU) contains a set of menus, settings and operations which are
infrequently used by a user. Generally, the options made available in this menu are used to configure a printer for
operation.
The following are available from the Configuration Menu:
Black&White Lock
Fuser Cnt Value
Reset Fuser Cnt
Prt Quality Pgs (This is not displayed if in Demo mode.)
Color Trapping
SIZE SENSING
TYPE SENSING
SENSED TRANS
SENSED PAPER
CALIBRATE TRAYS
Panel Menus
PPDS Emulation - This only displays if the PPDS interpreter is available.
Download Emuls - This only displays if at least one Downloaded Emulator is installed.
Demo Mode
Factory Defaults
Energy Conserve
ITU Alignment
Auto Color Adj
Error Log
Exit Config Menu (Press Select to exit CONFIG MENU and reboot.)
Note: An asterisk(*) in the value list in the following menus indicates the default value.
Entering CONFIG MENU
To access to the CONFIG MENU:
1.
Turn the printer off.
2.
Press and hold Select and Return while you turn the printer on.
When Performing Self Test displays, release the buttons.
3.
Black&White Lock
Select Black&White Lock from the CONFIG MENU.
Values:
Fuser Cnt Value
Select Fuser Cnt Value from the CONFIG MENU. You can not reset this value. It only displays if the
Maintenance Warning and Intervention function is enabled in the printer Configuration ID.
The value can be viewed by pressing Select.
=On
=Off
5060-00x
3-7
Diagnostic aids