Lexmark 13P0195 - C 750dn Color Laser Printer Service Manual page 452

5060-00x
Tall finisher
Loosen or tighten the wingnuts (G) to adjust the height of the finisher (clockwise raises the finisher).
Step 3: Align the bumper pads
Adjust the two casters on the right side (under the platform cover) to raise or lower the finisher as needed so the
two bumper pads on the finisher lightly touch the printer.
This ensures that the gap (H) between the printer and finisher is the same from top to bottom.
A-26
Service Manual