Table of Contents
Advertisement
User primary
User secondary
message
message
56 Standard Serial
Disabled
56 Serial Port x
Disabled
56 Std Parallel Port
Disabled
56 Parallel Port x
Disabled
56 Standard USB
Port Disabled
56 USB Port x
Disabled
58 Too Many Trays
Attached
58 Too Many Bins
Attached
Explanation
These messages may appear when data is sent to the
printer across a serial port, but the port is disabled.
Note: Once the error is displayed the first time, reporting of
further errors is suppressed until the printer is reset or
menus are entered.
The following actions can be taken:
• Press Go to clear the message. Any data received on
the serial port is discarded.
• Press Menu to access the Busy/Waiting Menu.
The following functions may be available:
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
These messages may appear when data is sent to the
printer across a parallel port, but the port is disabled.
Note: Once the error is displayed the first time, reporting of
further errors is suppressed until the printer is reset or
menus are entered.
The following actions can be taken:
• Press Go to clear the message. Any data received on
the parallel port is discarded.
• Press Menu to access the Busy/Waiting Menu.
The following functions may be available:
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
These messages may appear when data is sent to the
printer across the USB port, but the port is disabled.
Note: Once the error is displayed the first time, reporting of
further errors is suppressed until the printer is reset or
menus are entered.
The following actions can be taken:
• Press Go to clear the message. Any data received on
the USB port is discarded
• Press Menu to access the Busy/Waiting Menu.
The following functions may be available:
• Reset Printer
• Reset Active Bin
• Check Supply Levels
Note: Menu Lockout does NOT prevent access to the Busy/
Waiting Menu.
This message is displayed when too many trays are
attached to the printer. Check the specifications and verify
the number of trays allowed on each printer model.
This message is displayed when too many optional bins are
attached to the printer or if an unsupported combination of
bins is installed.
5060-00x
2-39
Diagnostic information
Advertisement
Table of Contents
