Table of Contents
Advertisement
Error code
170 Motor
171 Motor
172 Motor
173 Motor
174 Motor
175 Motor
176 Motor
180 PSD Error
181 PSD Error
182 PSD Error
183 PSD Error
184 PSD Error
185 PSD Error
Action
Mirror motor lost lock (black). Go to
page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved (cyan). Go to
on page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock (cyan). Go to
page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved (magenta). Go to
diagnostics" on page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock (magenta). Go to
page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lock not achieved (yellow). Go to
on page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
Mirror motor lost lock (yellow). Go to
page
3-1.
Note: Do not adjust or replace any printhead before performing checks in
"Printhead diagnostics" on page
PSD sensor error (black). Update machine code. Run a Line Length test
page. See
"Prt Line Len Pg" on page
If the problem persists, go to
PSD sensor error (cyan). Update machine code. Run a Line Length test
page. See
"Prt Line Len Pg" on page
If the problem persists, go to
PSD sensor error (magenta). Update machine code. Run a Line Length
test page. See
"Prt Line Len Pg" on page
If the problem persists, go to
PSD sensor error (yellow). Update machine code. Run a Line Length test
page. See
"Prt Line Len Pg" on page
If the problem persists, go to
EOS sensor out of range scan direction (black). Update the machine
code. Run a Line Length test page. See
page
3-19.
If the problem persists, go to
EOS sensor out of range scan direction (cyan). Update the machine
code. Run a Line Length test page. See
page
3-19.
If the problem persists, go to
"Printhead diagnostics" on
3-1.
"Printhead diagnostics"
3-1.
"Printhead diagnostics" on
3-1.
"Printhead
3-1.
"Printhead diagnostics" on
3-1.
"Printhead diagnostics"
3-1.
"Printhead diagnostics" on
3-1.
3-19.
"Printhead diagnostics" on page
3-19.
"Printhead diagnostics" on page
3-19.
"Printhead diagnostics" on page
3-19.
"Printhead diagnostics" on page
"Prt Line Len Pg" on
"Printhead diagnostics" on page
"Prt Line Len Pg" on
"Printhead diagnostics" on page
Diagnostic information
5060-00x
3-1.
3-1.
3-1.
3-1.
3-1.
3-1.
2-15
Advertisement
Table of Contents
