5060-00x
Scheduled maintenance
The operator panel displays 80 Fuser Maintenance and 83 ITU Maintenance for scheduled maintenance.
80 Fuser Maintenance is displayed at each 150K copies when the fuser assembly needs to be replaced to
maintain the print quality and reliability of the printer. The parts are available as a maintenance kit with the
following part numbers:
Standard fusers
•
12G6496, Maintenance kit 115V
•
12G6497, Maintenance kit 220V
•
12G6498, Maintenance kit 100V
Web oiler fusers
•
12G6514, 110 V web oiler fuser
•
12G6515, 220 V web oiler fuser
•
12G6502, 100 V web oiler fuser
After replacing the kit, the fuser maintenance count must be reset to zero to clear the maintenance message.
See
"Reset Fuser Cnt" on page
83 ITU Maintenance is displayed at each 105K copies when the ITU Assembly needs to be replaced to maintain
the print quality and reliability of the printer. There are two assemblies, ITU assembly and Second Transfer Roll,
in a maintenance kit. Both should be replaced at the same time. The parts are available as a maintenance kit
with P/N 12G6304, ITU Maintenance Kit.
84 Oiler Nearly Exhausted is displayed at each 100K copies when the Web Oiler Assembly is nearly exhausted.
Go to
"Web oiler assembly" on page 7-11
6-4
Service Manual
3-8.
for part number.