Print Line Length Calibration - Lexmark 13P0195 - C 750dn Color Laser Printer Service Manual

Print line length calibration

1.
Press Return until you reach the main Diagnostic Menu (the top line is blank and bottom line displays
Alignment).
2.
Press Menu until Print Tests is displayed and press Select.
3.
Select Print Line Length Calibration.
There are six alignment groups, A through F.
See "Print Line Len page" on appendix page B-12
4.
A color band is visible through the black bars. Locate the center of the color band and determine the value.
•
If all the color bands for cyan, magenta, and yellow on all six groups A through F are centered
between -2 and +2, you are done.
•
If the center is located outside the area between -2 and +2, you need to calculate the appropriate
alignment adjustment for that color. Continue to the next step.
5.
Calculate the Alignment Group values.
Alignment Group
A
B or C
D
E
F
6.
After completing calculations for the colors that are beyond -2 and +2 range, return to the Alignment menu.
See "Electronic color alignment" on page
Adjustment Calculation(s)
dT=(A+B+B-C+D)/3
dT=(A+B+B-C+D)/3
dT=(A+B+B-C+D)/3
dL=(E-F)*6
dL=(E-F)*6
4-58.
for a color sample.
---
dZ=(B-C)*2
---
---
dR=F*6
Repair information
5060-00x
4-61