Lexmark C750 Clearing Jams Manual

Lexmark C750 3 Open the left access door. Hold down the lever while removing
jams.
Clearing Jams
When a paper jam occurs, the printer stops operating and displays
2xx Paper Jam and a message to Clear Paper Path.
Clearing the paper path
1 If you are using the multipurpose feeder, release the levers on
each side of the feeder to open it flat.
4 Close the door.
5 Open the 500-sheet drawer access door. Hold the door down
while removing jams.
2 Remove any jams and return the feeder to its working position.
Note: Make sure the entire paper stack is loaded correctly and 9 Open the front access door.
pushed all the way down into the tray.
10 Hold down the lever in the upper left corner. Remove jams in
the rollers under the image transfer unit.
6 Close the door.
7 Open the 2000-sheet drawer access door. Pull the jam down
and out of the rollers.
11 Open tray 1. Remove any jams.
Note: Make sure the paper is pushed all the way down into the
tray.
12 Close tray 1.
13 Pull the duplex mechanism completely out. Look up inside and
remove any paper caught in the rollers.
8 Close the door.
14 Reinstall the duplex mechanism in the printer. 21 Open the lower right access door.
15 Open trays 2 through 4 (all 500-sheet trays) and remove jams.
Note: Make sure the paper is pushed all the way down into the
tray.
16 Close trays 2 through 4.
17 Open the 2000-sheet drawer.
22 Remove any jams, and then close the door.
18 Remove any jams, and then close the 2000-sheet drawer.
19 Open the upper right access door.
© Copyright 2001 Lexmark International, Inc. All rights reserved.
20 Remove jams from the rollers and then close the door.
E.C. 2B0151
Printed in U.S.A.
This document is printed on recycled paper. 8/01
P/N 10B2626