5060-00x
Electronic color alignment
Note: Use of a loupe or magnifying glass (4x or higher) may make observation of the alignment targets easier.
1.
Press Menu until Alignment displays and press Select.
2.
Select Alignment Test from the Alignment menu.
Three sheets print for Cyan, Magenta, and Yellow. Each is compared to Black alignment.
For example, one of the sheets shows Cyan printed over a Black target. Align the Cyan over the Black.
Repeat for each of the colors Cyan, Magenta, and Yellow.
3.
To align Cyan, press Menu until Cyan is displayed, press Select. Four alignment settings are displayed.
T= Top
R= Right
•
Menu changes the values.
•
Select saves the new value chosen and moves to the next margin setting.
•
Press Go to print the individual color Alignment Page after adjusting the targets and saving the
change (Select).
•
The range of values differs for the various margin offsets.
Value
T
L
R
Z
A-12
Service Manual
L= Left
Z= Theta
Description
Top Margin Offset
Left Margin Offset
Right Margin Offset
Theta Offset (Skew
compensation)
Range
-128 to +127
-300 to +300
-300 to +300
-16 to +16