Operating Setting Switches - Fujitsu MB2147-01 Application Note

CHAPTER 3 OPERATION METHOD
3.1

Operating Setting Switches

This section explains how to operate the setting switches and the status indicator
LCDs.
I Functions of Setting Switches
The setting switches can be used to change the information displayed on the status indicator
LCD (called "LCD" in the rest of this manual) and change LAN parameters displayed on the
LCD.
This section explains the menu displayed on the LCD and how to use the setting switches with
by selecting from the menu. For details about use of the switches and information displayed on
the LCD in menu selection mode or normal operation mode, see the Softune Workbench
Operation Manual.
Table 3.1-1 "Functions of Setting Switches" lists the functions of the setting switches.
Table 3.1-1 Functions of Setting Switches
Marking
Key
created by silk
name
screen printing
ENTER
key
Up and
down
keys
36
Information displayed
on LCD
Emulator top screen
Menu
LAN parameters
Select/check
Menu
LAN parameter/select
LAN parameters
Function
Changes the screen to the menu.
Changes display to the submenu of the selected
item.
Sets the column (position) to be changed.
Sets a new value (numeric value).
Sets a selected item or terminates display after
confirmation.
Moves the cursor upward, downward, to the left,
or to the right.
Moves the cursor up, down, to the right, or to the
left.
Increments or decrements the value (numeric
value) to be changed.