4.1.2
Paper that cannot be used
Do not use the following paper.
Contact our Customer Support Center or your dealer if you have any questions.
Transparency with white
●
border like FUJI XEROX
Full Color Transparency
Example:
V302
●
Transparency for an ink
jet printer
Paper only for an ink jet printer
●
Black or dark color paper
●
●
Electric spectaculars film
●
Aqua-transfer paper
J, J-D coated paper is available.
●
Paper that is too thick or thin
Carbon paper
●
●
Envelopes with concavity and convexity
or catches
Wrinkled, creased, or torn paper
●
●
Paper which was printed once by an other
printer or copy machine
Treated colored paper
●
●
Paper which is tightly stuck together due
to static electricity
Paper with non-smooth face such as
●
rough printing paper or fibered paper
●
Specially-coated paper
Paper with staples, clips, ribbons, or tape
●
Bonded or glued paper
●
●
Paper which has been previously printed
with ink that will change in quality at
155°C
●
Damp or wet paper
V556,
V558,
Full color
transparency
Digital coat glossy type
●
●
Heat-sensitive paper
●
No. 2 registered drawing
●
Tracing paper
●
Cloth transfer/color cloth transfer paper
●
High class Japanese paper for color copy
Xerographic photo paper
●
Tucked film
●
2
●
Coated paper of 126 g/m
●
Envelopes on which the
sealing part is sticky with
glue
●
Labels on which the mat
board is not entirely
covered by the labels
●
Pre-cut labels which are
loaded in the orientation
as shown in the figure
Can be used when loading it
into Tray 5 (bypass tray) in
orientation.
When using acid paper, the print result
●
may blur. If so, change the paper to acid-
free paper.
4.1 About Paper
or less
4
Sticky with glue
Not entirely covered
Pre-cut
115