Setting Non-Standard Paper Sizes - Xerox DocuPrint C2428 User Manual

3.3 Printing Non-Standard/Long Paper Sizes
3.3.2

Setting Non-Standard Paper Sizes

Register non-standard sizes on the printer driver.
To load paper of non-standard sizes into Trays 1 to 4 for printing, you also need
to change the settings on the control panel.
Settings on the control panel
This procedure registers paper with a 200 mm short edge and a 300 mm long
edge as an example.
The printer may be damaged if the correct paper size is not set while printing.
When loading paper of non-standard sizes into Tray 5 (bypass tray), you do not need to set the
●
paper type on the control panel.
3
To change the paper type loaded in Trays 1 to 4, see "3.4.2 Printing after Changing the Paper
●
Type in Trays 1 to 4" (P.75).
Ready to print
(1)Press the <Menu> button.
Menu
Print Language
Menu
68
(Printer is in the standby mode.)
(The menu screen is displayed.)
(2)Press the < > or <
Admin Menu
(3)Press the < > button.
Admin Menu
(The System Administrator Menu is displayed.)
Network/Port
(4)Press the < > or <
Admin Menu
Printer Settings
(5)Press the < > button.
Printer Settings
(Printer setting screen is displayed.)
Substitute Tray
To the next page
> button several times.
> button several times to select [Printer Settings].