Xerox DocuPrint C2428 User Manual page 174

6.2 Clearning Paper Jams
3
If the paper does not reach the BTR
unit, pull it out in the direction indicated
by the arrows as shown in the diagram.
Never touch the area (the fuser unit
and surroundings) labelled "High
Temperature". You may suffer burns. If
a sheet of paper is wrapped around the
fuser unit or the roller, do not try to
remove it by yourself. You may get
injured or suffer burns. Instead, switch
off the printer immediately, and contact
our Customer Support Center or your
dealers.
Do not pull out the paper from the tray 5 (bypass tray)
side as shown in the diagram. Unfused toner may be on
a roller, staining the paper that is loaded next.
4
If the head of the paper stays in the
BTR unit, release the green lever as
6 shown in the diagram.
Do not move the khaki lever.
5
Pull the head of paper in the direction
indicated by the arrow as shown in the
diagram.
Make sure that the paper does not touch the chute.
174
Chute