3.2
This section describes how to print transparencies.
For information about using Tray 5 (bypass tray), refer to "4.2 Loading Paper" (P.117).
3.2.1
Loading Transparencies
For transparencies, load them into Tray 5 (bypass tray) or Tray 1.
Transparencies with white borders or full color transparencies cannot be used.
Procedure
■For Tray 5 (bypass tray)
3
1
Load the transparencies with the side
to be printed facing down.
2
Fan transparencies in small amounts
before loading.
■For Tray 1
The procedure of loading transparencies into Tray 1 is the same as the
procedure for loading standard-size paper. Refer to "4.2.1 Loading paper into
Trays 1 to 4" (P.117).
Also, you must set the paper type for the tray to transparency.
To change the setting, refer to "3.4 Changing Paper Types" (P.74).
62
Printing Transparencies
Side to be
printed