Xerox DocuPrint C2428 User Manual page 198

6.5 List of Messages
Error code
016-760
016-761
016-762
6
016-764
016-765
016-766
016-767
198
Cause: An error occurred during PostScript processing.
Action: Take one of the following actions.
● If [Print Mode] is set to [High Resolution], set it to [High Quality].
If the status has still not improved, set it to [Standard].
● Increase the print page buffer capacity.
● Increase the memory used by PS.
For information about [Print Mode], refer to the On-line Help for the
printer driver.
Cause: An error occurred during image processing.
Action: If [Print Mode] is set to [High Resolution], change it to [High
Quality] and try to print again. If the problem still persists, set
[Print Page Mode] to [On] and try to print.
For information about [Print Mode] and [Print Page Mode], refer to
the On-line Help for the printer driver.
Cause: A print language, which is not installed was specified.
Action: This printer can process PCL, TIFF, and PDF data as standard.
To send other print data, install the option for processing the
appropriate print language.
If a PostScript Software Kit is installed, the following print
●
languages can be processed in addition to the above-mentioned
standard languages.
HP-GL and HP-GL/2
●
Cause: Cannot connect to the SMTP server.
Action: Consult administrator of the SMTP server.
Cause: Mail cannot be sent because the Hard Disk Drive of the SMTP
server is full.
Action: Consult the administrator of the SMTP server.
Cause: An error occurred on the SMTP server.
Action: Consult the administrator of the SMTP server.
Cause: Mail cannot be sent because the incorrect destination mail
address is specified.
Action: Check the destination mail address and send the mail again.
"3.7.1 Setting up the Environment for E-mail Printing" (P.86)
Cause/action