Printing After Checking Output Result - Sample Print - Xerox DocuPrint C2428 User Manual

3.6
Printing after Checking
Output Result
- Sample Print -
The Sample Print feature (checking the output and then printing the remaining copies) can
be used when this printer has a Hard Disk Drive (optional) and available memory of 384 MB
or more.
The Hard Disk Drive (optional) has a risk of failure. It is recommended to make a backup of important documents
stored on the Hard Disk Drive.
About the Sample Print feature
When printing multiple copies of a document, this feature saves the print data on
Hard Disk Drive and then prints out only one copy first. You can start printing the
remaining copies on the control panel after checking the print result. This feature
is known as Sample Print.
You can delete the sample print data that is no longer necessary, using the control panel. Refer to
"3.6.2 Printing Sample Print Jobs, Operations on the control panel" (P.84).
Print only first set
Send
data
Store in
printer
OK
Print out remaining sets
using the control panel
Stop printing using
the control panel
NG
3
81