Xerox DocuPrint C2428 User Manual page 31

Settings with the Setup menu
Configure the required settings on the control panel according to the following
procedures:
If you changed settings using the Quick Setup menu, the [System Settings List] may not be correct
when printed in step 8. Select for "Save Settings" in step 9, reboot the printer, and then print the
[System Settings List].
For information about printing the [System Settings List], refer to "1.5 Checking the Settings" (P.44).
If you press the <Menu> button during the setting procedure with the Quick Setup menu, settings will
be canceled.
Procedure
Ready to print
(1)Press the <Menu> button.
Menu
Print Language
(2)Press the <
Menu
Quick Setup
(3)Press the <
Setup?
(4)Press the <
Setup?
(5)Press the <Eject/Set> button.
Job History Auto
Print
To the next page
1.2 Setting the Printer Environment With the Quick Setup Menu
(Printer is in the standby mode.)
(The menu mode screen is displayed.)
> or < > button several times.
> button.
(The Setup menu is displayed.)
N/Y
> or < > button to select [Y].
N/Y
R/N/Y
(6)Answer each question using the <
Set> buttons. Use the <
< >, < >, < >, and <
<Eject/Set> button to save the setting. When you finish configuring the
settings, the following message is displayed.
>, < >, < >, <
> and < > buttons to select [N/Y], use the
> buttons to enter the value, and press the
1
>, and <Eject/
31