Xerox DocuPrint C2428 User Manual page 180

6.3 Unusual Conditions
Symptom
Paper is not output and
the <Standby>
indicator on or blinking.
Printing takes too long.
6
The paper tray cannot
be inserted/removed.
180
Cause
Data remains in the printer.
The reception buffer capacity may
possibly be insufficient.
Is [High Quality] or [High Resolution]
selected in [Print Mode]?
Printing time may be long
depending on the printing method
assigned to the TrueType font.
Did you open the cover or switch the
power off during printing?
Action
Stop printing, or eject the remaining
print data.
"2.4 Canceling/Checking Print Jobs"
(P.54) "6.8 Ejecting Remaining Data-
When Printing Stops Halfway Through-"
(P.205)
In order to print high-resolution
documents, increase the print page
buffer capacity by decreasing the
memory capacity assigned to unused
items from [Allocate Memory] on the
control panel.
If the receive buffer capacity is
increased, print jobs can be processed
faster. Adjust the buffer capacity
according to the print data volume.
For ports that are not in use, it is
recommended to disable them and
allocate their memory for other uses.
Memory Settings (P.152)
If the settings in [Print Mode] are
changed to [Standard], the printing
time might be shortened.
On-line Help for the printer driver
Change the printing method for the
TrueType font.
On-line Help for the printer driver
Switch the power off instead of inserting/
removing the paper tray forcibly. Then,
turn on the power switch after a few
seconds. Insert/remove the paper tray
after checking that this printer is able to
receive the data.