Xerox DocuPrint C2428 User Manual page 95

Removing a Flash Memory
Remove the Flash Memory after checking that the power indicator (green) on the
Media Print Kit is off.
When the access indicator on the Media Print Kit is on, do not press the <Eject> button or switch off
the power to the printer. It may damage the data in the Flash Memory.
Procedure
■Switch off the power of Media Print kit
This operation is not required when the power indicator (green) of the Media
Print Kit is off. Proceed to "Remove a Flash Memory" below.
Ready to print
(1)Press the <
Print Menu
Media Print
(2)Press the <
Print Menu
Remove PC Card
(3)Press the <
Use Set to
eject PC Card
(4) Press the <Eject/Set> button.
Print Menu
Remove PC Card
(5)Press the <
Ready to print
■Remove a Flash Memory
1
Press the tab at the bottom of the Flash
Memory port and pull out the Flash
Memory.
3.8 Printing from Flash Memory - Media Print -
> button.
> or < > button several times to select [Remove PC Card].
> button.
(Message changes from [Request being processed...] to
[Please remove PC Card] and the message shown at left
is displayed.)
> button.
Check that the power indicator on the Media Print Kit is off, and
see "Remove a Flash Memory" below.
3
95