Xerox DocuPrint C2428 User Manual page 213

4
Turn the handle counter-clockwise to
the key-mark ( -mark) guideline
position while pulling the lever inside
the handle.
If it is difficult to pull the lever, pull the handle slightly
to the left, and then pull the lever.
5
Hold the handle of the IDT unit, and pull
it slowly until it no longer moves.
Do not touch the transfer roll of the IDT unit. It may
lower the print quality.
6
Hold the handle of the drum cartridge,
and remove it by lifting it up slightly.
Be careful not to drop the drum cartridge on the floor
●
when removing it.
Be careful not to touch any toner stock to the drum
●
cartridge.
Lay the used drum cartridge as shown in the diagram
●
so that you do not carelessly touch it.
Bring the used drum cartridge to us/distributor or
●
send it back to us according to the instructions on the
sheet included.
7
Take out the new drum cartridge from
the box, and remove the packaging material.
8
Hold the handle of the drum cartridge
with the protective sheet attached and
fix tabs (1) and (2), and then fix the
inner tab (3) as shown in the diagram.
7.2 Replacing Drum Cartridge
Transfer roll
of the IDT unit
7
213