Table of Contents
Advertisement
6.5 List of Messages
Error code
016-719
016-720
016-721
016-726
6
016-728
016-729
016-730
016-731
196
Cause:
PCL print data cannot be processed because the necessary
memory is insufficient.
Action:
If [Print Mode] is set to [High Resolution], change it to [High
Quality] and try to print again. If the status has still not improved,
set [Print Mode] to [Standard] and try to print.
On-line Help of the printer driver
Cause:
Detected an unsupported command.
Action:
Check the print data for the command that caused the error then
eliminate it and print the job again.
Cause:
An error occurred during the print processing. It may be caused
by the following.
If [Paper Priority] of [Printer Settings] in the Common Menu is set
to [Not Selected] for all paper types, your print instructions
specified Auto Tray Switch.
Action:
Set [Paper Priority] to a setting other than [Not Selected] for any
desired paper type when you attempt to print with Auto Tray
Switch specified. Note that [Paper Priority] is automatically set to
[Not Selected] if [Custom Paper Size] is selected.
"Paper Priority" (P.150)
Cause:
Though Print Mode is set to [Auto], the print language cannot be
automatically selected.
It may be caused by the following.
(1)PostScript data is sent even though no PostScript Software Kit
(optional) is installed.
(2)PDF file is sent to this printer by using LPR when PostScript
Software Kit (optional) is installed but no Hard Disk Drive
(optional).
Action:
In case of (1), PostScript Software Kit (optional) is required.
In case of (2), Hard Disk Drive (optional) is required.
Cause:
TIFF file contains an unsupported tag.
Action:
Check the print data.
Cause:
Cannot print because the number of colors and the resolution of
the TIFF data exceeds the upper allowable limit.
Action:
Change the number of colors and the resolution of the TIFF file,
and try to print again.
Cause:
Unsupported command is detected.
Action:
Check the print data and delete the error-causing command, and
then try to print again.
Cause:
Cannot print because the TIFF data sent to the printer is
incomplete.
Action:
Try to print again.
Cause/action
Advertisement
Table of Contents
Troubleshooting
