Attendant Features
To delete logged 911 alert messages:
1. Press the 911 ALERT flexible button to display the 911 call
you want to delete.
2. Press the FLASH button to delete that message.
Attendant Override
When Attendant Override is allowed, Attendant(s) stations may
override or call stations that are either busy or in Do Not
Disturb.
If the Attendant calls a station that is busy on a CO call
and wishes to alert them of a waiting call:
Press the ATTN OVERRIDE button [601]. Three short tone
bursts are presented to the called party.
(After five (5) seconds, the station CO line automatically is
placed on hold and the Attendant is cut-thru.)
If the Attendant calls a station that is in Do Not Disturb
mode and wishes to alert them of a call:
Press the pre-programmed ATTN OVERRIDE flexible
button. The station will be signaled with a Camp-On tone.
Attendant Unavailable (Alternate Position)
When the Attendant station is in the unavailable mode, the
next Attendant station receives recalls and dial "0" calls.
The following process is based on the three programmed
Attendant stations.
Dialing 911 from any station overrides previously
enabled features such as:
Do Not Disturb.
❑
Flex
Btn
5