Editing The Name Of A Scene - Yamaha AW4416 Operation Manual

Editing the name of a scene

Here's how you can edit just the name of a stored scene.
1. Press the [SCENE] key
The Scene Mem page of the SCENE screen will appear.
2. Use the [DATA/JOG] dial to select the scene whose scene name you wish
to edit.
It is not possible to select a scene that has not been stored, a scene whose protect
setting is on, or scene number 00.
3. Use the CURSOR [
EDIT button in the upper left of the display, and press the [ENTER] key.
The TITLE EDIT popup window will appear, allowing you to edit the scene name.
4. Use the CURSOR [
the new scene name.
5. To finalize the edited scene name, move the cursor to the OK button
and press the [ENTER] key.
The scene name will be updated. If you wish to cancel without changing the
scene name, move the cursor to the CANCEL button and press the [ENTER] key.
[F1] key.
]/[ ]/[ ]/[ ] keys to move the cursor to the TITLE
]/[ ]/[ ]/[ ] keys and the [ENTER] key to input
Chapter13—Scene memory
207
— Operation Guide