Switching The Virtual Track Of The Stereo Track; Editing The Name Of A Virtual Track For The Stereo Track - Yamaha AW2400 Owner's Manual

Stereo track operations
3
Press the RTZ [
and press the PLAY [
The stereo track will play back. Use the [STEREO]
fader to adjust the monitor level.
To return to normal playback of the audio tracks,
switch the ST TR MODE ON/OFF button back OFF.
HINT
• If the ST TR MODE ON/OFF button is ON, pressing the
[RECORD] key while the recorder is stopped will display a
popup window asking you to confirm that you want to defeat
stereo track playback mode. If you want to do so, move the
cursor to the OK button and press the [ENTER] key.
Switching the virtual track of the
stereo track
1
Call the TRACK screen Stereo TR page by
either pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F3] key after pressing
the [TRACK] key.
2
Use the CURSOR keys to select the virtual
track number that you want to assign.
The currently selected virtual track is indicated by a
"●" symbol. Of the other virtual tracks, those that
have been recorded are indicated by " ," and those
that have not yet been recorded are indicated by "–."
3
Press the [ENTER] key.
The "●" symbol will be displayed at the position of
the newly-selected virtual track. This virtual track will
15
now be used for recording/playback.
132
AW2400 Owner's Manual
] key to rewind the song,
] key.
Editing the name of a virtual track
for the stereo track
Here's how to edit the name of the virtual track currently
selected for the stereo track.
1
Call the TRACK screen View page by either
pressing the Work Navigate section
[TRACK] key as many times as necessary,
or by pressing the [F1] key after pressing
the [TRACK] key.
TRACK field
RENAME button
2
Move the cursor to the TRACK field, and
use the [DATA/JOG] dial or the [INC]/[DEC]
keys to make it read "ST."
You can edit the name of the virtual track that is cur-
rently enabled for the stereo track.
3
Move the cursor to the RENAME button and
press the [ENTER] key.
The NAME EDIT popup window will appear, allow-
ing you to assign a name to the virtual track.
4
Edit the name of the virtual track, move the
cursor to the OK button, and press the
[ENTER] key. (For details on entering a
name → p. 32)
The edited name will be finalized.