Display Section - Yamaha AW4416 Operation Manual

Chapter2—Parts and their functions

Display section

SHIFT
1 Display
This is a 320 240 pixel liquid crystal display with backlight, that displays the val-
ues of the mix parameters and the current operating status.
B [PAN] control
This controls the pan of the channel currently selected by the [SEL] key. If the ste-
reo output channel is selected, this controls the L/R channel balance.
C EQ [Q]/EQ [F] (EQ frequency)/EQ [G] (EG gain) controls
These are controls for manually operating the EQ of the channel currently
selected by the [SEL] key. From above, they adjust the Q (steepness), F (center fre-
quency), and G (gain) parameters. Use the 4 EQ [HIGH]–EQ [LOW] keys to
select the band that will be controlled.
D EQ [HIGH]/EQ [HI-MID]/EQ [LO-MID]/EQ [LOW] keys
These keys select the band that will be controlled by the 3 controls.
E [F1]–[F5] (function 1–5) keys
These keys are used to access pages or to execute specific functions, according to
the tabs or buttons shown at the bottom of the display.
38
— Operation Guide
1
F1 F2 F3
5
PAN
Q
F
G
F4 F5
SHIFT
6
PAN
EQ
F HI
HI-MID
G
LO-MID
Q LO
SHIFT F1 F2 F3 F4 F5 SHIFT
2
EQ
HIGH
HI-MID
LO-MID
4
LOW
3
7
PROFESSIONAL AUDIO WORKSTATION