Input Patch - Yamaha AW4416 Operation Manual

Input patch

The input patch section is where input signals are assigned to input channels 1–
24 and return channels 1/2. The following types of input signal can be selected.
MIC/LINE INPUT
Input signals from analog INPUT jacks 1–8.
OPTION IN
Input signals from an I/O card installed in rear panel OPTION I/O slots 1/2. Up to
8 channels of signal can be input simultaneously from a single I/O card.
SAMPLING PAD
Output signals of pads 1–8 in the sampling pad section.
EFFECT 1/2
Return signals from internal effects 1/2.
DIGITAL STEREO IN
Input signals from the DIGITAL STEREO IN jack.
METRONOME
The playback of the internal metronome.
The following input signals can be assigned to each channel.
MIC/LINE INPUT
OPTION IN
SAMPLING PAD
EFFECT 1
EFFECT 2
DIGITAL STEREO IN
METRONOME
Chapter1—Welcome to the world of the AW4416
Input channel 1–24 Return channel
(mono)
O
O
O
O
O
Return channel
1 (stereo) 2 (stereo)
O
O
O
O
— Operation Guide
O
O
O
O
23