Let's Record - Yamaha AW4416 Operation Manual

Let's record!

1. Press the Locate section [RTZ] key.
The level meter/counter and the display counter will rewind to zero
(00:00:00.000).
Tip!
With the default settings of the song, hours (hours/minutes/seconds/milliseconds)
are selected as the counter unit of the level meter/counter and display counter.
However you may switch this to time code display (hours/minutes/seconds/frames/
sub-frames) or measure display (measure/beat/tick) if desired.
2. To begin recording, hold down the Transport section [REC] ( ) key and
press the [PLAY] (®) key.
The [REC] key and [PLAY] key will light, and the red REC READY indicators of the
[REC TRACK SELECT] keys 1/2 and the level meter/counter will change from
blinking to lit.
When you attempt to record the signal being input from the DIGITAL STEREO IN
jack, the display may sometimes indicate "DIGITAL-ST-IN-PROHIBIT, " and you
will be unable to perform step 2. In this case, go to UTILITY screen Prefer.2 page
([UTILITY] key
details refer to Reference Guide "UTILITY" screen.)
MARK SEARCH
7
NUM
LOCATE
4
AUTO
IN
PUNCH
1
REPEAT A
0
RTZ
[F3] key), and set CD/DAT DIGITAL REC to ENABLE. (For
REW FF STOP
Chapter5—Recording on the AW4416
8 9
MARK
LAST REC LAST REC
5 6
OUT SET
2 3
B ROLL
BACK
CANCEL
NO
PROFESSIONAL AUDIO WORKSTATION
REW FF STOP PLAY REC
PLAY REC
— Operation Guide
85