Home Screen; 1-24/Rtn Page; Monitor The Input Level Of The Input Channels - Yamaha AW4416 Operation Manual

Monitor the input level of the input channels

[Function]
Monitor the input levels of input channels
1–24 and return channels 1/2.
[Key operation]
• [HOME] key [F1] (1–24/Rtn) key
• Repeatedly press the [HOME] key until
the screen shown at the right appears
[Mouse operation]
M button HOME button
tab
[Screen functions]
A
Level meters
These meters show the input levels of input
channels 1–24 and return channels 1/2. The
fader position is shown in dB units below each
level meter.
B STEREO OUT LEVEL
This shows the position of the STEREO fader in
dB units.
C
PRE EQ button
D
POST EQ button
E
POST FADER button
Select one of these three buttons to select the
location in the signal path (pre-EQ/post-EQ/
post-fader) whose level will be shown by the
level meters.

HOME screen

1–24/Rtn page
1–24/Rtn
1
2 3
Additional functions in the 1–24/
Rtn page
In the 1–24/Rtn page you can press the [SHIFT] key
to assign the following function to the [F1] key.
F1
• [F1] (PEAK HOLD) key
This key sets/defeats the Peak Hold function.
This is the same function as the [PEAK HOLD]
key in the level meter/counter section. When
Peak Hold is on, a "
tained in the level meter to indicate the peak
level.
4 5
" symbol will be main-
75
— Reference Guide