Editing The Value Of A Fader/Knob/Numerical Box; Using The Controls Of The Top Panel; Using The Mouse - Yamaha AW4416 Operation Manual

Chapter3—The user interface of the AW4416
Editing the value of a fader/knob/numerical
box
Here's how to edit the value of an on-screen fader/knob/numerical box.

Using the controls of the top panel

1. Use the CURSOR [
desired fader/knob numerical box.
2. Rotate the [DATA/JOG] dial to edit the value.

Using the mouse

1. Move the pointer to the desired fader/knob/numerical box, and click the
left or right mouse button.
The cursor will change to a
Tip!
The amount by which the value changes will differ depending on whether you
clicked the left or right mouse button. If you wish to change the value in large steps,
click the right button. If you wish to change the value in fine steps, click the left
mouse button.
2. Continue to hold down the mouse button, and drag the mouse up or down.
The value will increase or decrease depending on the direction in which you drag
the mouse.
58
— Operation Guide
]/[ ]/[ ]/[ ] keys to move the cursor to the
< Move the cursor >
< Edit the value >
shape.
< Click the fader/knob/numerical box >
< Drag the fader/knob/numerical box up or down >