[Sel] Keys, [On] Keys, Faders - Yamaha AW4416 Operation Manual

[SEL] keys, [ON] keys, faders

1
SEL
2
ON
17
1
+6 +6 +6 +6
3
0 0 0 0
5 5 5 5
10 10 10 10
20 20 20 20
40 40 40 40
60 60 60 60
1
1 [SEL] (select) keys
These keys select the channel to be operated. The [SEL] key of the currently
selected channel will light. When using automix, the [SEL] keys are used to select
the channels that will be recorded.
B [ON] key
These keys turn each channel on/off. The [ON] key will be lit for channels that
are currently on; the [ON] key will be dark for channels that are off (muted).
When the solo function is on, the [ON] keys will function as solo keys.
C Faders
Depending on the settings of the FADER mode section, these moving faders
adjust the input level or send levels to AUX 1–8 for each channel.
• The channels that correspond to the [SEL] keys 1–16, [ON] keys 1–16, and
faders 1–16 will change depending on the setting of the MIXING LAYER sec-
tion.
• The STEREO [SEL] key, STEREO [ON] key, and STEREO fader always control
the stereo output channel. They are not affected by the MIXING LAYER sec-
tion.
D [SOLO] key
This key turns the Solo function on/off.
SEL SEL SEL
ON ON ON
18 19 2
2 3 16
+6 +6 +6 +6 +6 +6
0 0 0 0
5 5 5 5
10 10 10 10
20 20 20 20 20 20
40 40 40 40 40 40
60 60 60 60 60 60
2 15 16 STEREO
Chapter2—Parts and their functions
SEL
ON SOLO
4
0
5
10
15
20
30
40
50
70
PROFESSIONAL AUDIO WORKSTATION
SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL SEL
ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON SOLO
17 18 19 20 21 22 23 24 1 RTN 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
+6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 +6 0
5
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 10
15
5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
20
10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 30
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 40
50
40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 60 70
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 STEREO
37
— Operation Guide