Locate Section - Yamaha AW4416 Operation Manual

E [ENTER] key
This key is used to finalize a value, execute a function, or move to the specified
locate point.

Locate section

In this section you can perform locate operations for the recorder.
1 [NUM LOCATE] (number locate) key
This key is used to specify a locate point as a numerical value. When this key is
lit, you can use the numeric keys or the [DATA/JOG] dial to input a locate posi-
tion, and press the [ENTER] key to execute the Locate operation.
B MARK SEARCH [
These keys are used to move to the nearest pre-specified mark point.
C [MARK] key
When you press this key, the current location will be memorized as a mark point.
D [AUTO PUNCH] key
This key turns the auto punch-in/out function on/off.
E LAST REC[IN]/[OUT] (last record in/out) keys
These keys move to the point at which recording was last begun (the IN point) or
ended (the OUT point).
F [SET] key
This key is used in conjunction with the LAST REC[IN]/[OUT] keys and the [A]/
[B] keys to set the last record in/out points or the A/B points. It is also used in con-
junction with the [
PROFESSIONAL AUDIO WORKSTATION
MARK SEARCH
7 8 9
NUM MARK
LOCATE
LAST REC LAST REC
AUTO 4 IN OUT 5 6 SET
PUNCH
1 2 3
REPEAT A B ROLL
BACK
0
RTZ CANCEL
NO
4
7
8
]/[ ] keys
] key to set the zero point of relative time (REL).
Chapter2—Parts and their functions
1 2
MARK SEARCH
7 8
NUM
LOCATE
LAST REC LAST REC
4 5
AUTO
IN OUT
PUNCH
1 2
REPEAT A
B
0
RTZ
J K L
— Operation Guide
3
9
MARK
5
6
6
SET
9
3
ROLL
BACK
CANCEL
M
43