Yamaha AW4416 Operation Manual page 303

C
RECORDER TRACK INPUT ASSIGN
Here you can select the signals to be assigned
to the inputs of tracks 1–16. The following sig-
nals can be assigned.
Recorder inputs 1–16
Display
BUS 1–BUS 8 Bus 1–8
Input channel direct out 1–
DIR 1–DIR16
16
Tip!
For detai ls on operations in the Patch IN
page, refer to Operation Guide "Chapter 8.
Patching."
Signal type
Additional functions in the Patch
IN page
In the Patch IN page you can press the [SHIFT] key
to assign the following function to the [F1] key.
F1
• [F1] (CHANGE TAB) key
Switch between the following two tab displays.
SET UP screen
15
— Reference Guide