D.in Setup Page; Make Word Clock/Cascade Settings - Yamaha AW4416 Operation Manual

Professional audio workstation
Hide thumbs Also See for AW4416:
Table of Contents

Advertisement

SET UP screen

Make word clock/cascade settings

[Function]
Select the word clock source to which the
AW4416 will synchronize. In this page
you can also make settings for stereo bus
cascade connections.
[Key operation]
• [SETUP] key
[F4] (D.in Setup) key
• Repeatedly press the [SETUP] key until
the screen shown at the right appears.
*1. In the SET UP screen, the tabs dis-
played at the bottom of the screen are
divided into two groups. If the D.in
Setup tab is not assigned to the [F4]
key when you press the [SETUP] key,
press the [SHIFT] key + [F1] (CHANGE
TAB) key to switch the tabs.
[Mouse operation]
M button
SETU button
tab
[Screen functions]
A
Slots 1/2
If an optional I/O card is installed in OPTION I/
O slots 1/2, a graphic will be displayed to show
the type of I/O card. Cards in which no card is
installed will be displayed as "No Card!"
B
WORD CLOCK SOURCE
From the following choices, select one of the
following clock source to which the AW4416
will synchronize.
SLOT 1 1/2–7/8
SLOT 2 1/2–7/8
The input signal from a digital I/O card installed
in OPTION I/O slots 1/2 will be the clock
source. One pair of digital I/O card input chan-
nels 1/2–7/8 can be selected.
INT
The internal clock of the AW4416 will be used
as the clock source.
D.ST IN
The word clock data included in the input sig-
nal of the DIGITAL STEREO IN jack will be the
clock source.
20
— Reference Guide

D.in Setup page

(*1)
1
3
4
D.in Setup
2
WCLK IN
The word clock data included in the input sig-
nal of the WORD CLOCK IN jack will be the
clock source.
• The highlighted button indicates the cur-
rently selected word clock source.
• Buttons marked with an "X" indicate that no
digital audio signal is being input from the
corresponding slot/jack.
• Buttons marked by a / indicate that a digital
audio signal is being input from the corre-
sponding slot/jack, but is not synchronized
with the internal clock of the AW4416.
• Buttons without an X or / symbol indicate
that a digital audio signal is being input from
the corresponding slot/jack, and is synchro-
nized with the internal clock of the
AW4416.
5

Advertisement

Table of Contents
loading

Table of Contents