Locating To The Start/End Points - Yamaha AW4416 Operation Manual

Locating to the start/end points

The start point and end point normally correspond to the beginning and end of
the song. When you create a new song, absolute time 00:00:00.000 will be set as
the default start point. When you record a song, the last point in the song will
automatically be set as the end point. (If you extend the length of the song, the
end point will move accordingly.) You can locate to the start point by pressing the
[ ] key of the Locate section, or to the end point by pressing the [
The start point and end point will be displayed as follows in the TRACK screen TR
View page that appears when you press the [TRACK] key
Tip!
The locations of the start point and end point can be adjusted as desired (
MARK SEARCH
7
NUM
LOCATE
LAST REC LAST REC
4
AUTO
IN
PUNCH
1
REPEAT A
0
RTZ
Start point
Chapter6—Transport/locate operations
8 9
MARK
5 6
OUT SET
2 3
B ROLL
BACK
CANCEL
NO
[F1] key.
End point
— Operation Guide
] key.
P.123).
117