Chapter8-Patching - Yamaha AW4416 Operation Manual

Chapter8—Patching
1 Input channels 1–24
B Return channels 1/2
2. Move the cursor to the channel that you wish to patch, and use the
[DATA/JOG] dial to select the signal that you wish to assign.
The following signals can be assigned to each channel.
Input channels 1–24
AD 1 – AD 8
SL1-1 – SL1-8
SL2-1 – SL2-8
DIN L/DIN R
SMP 1 – SMP 8
MET
Return channels 1/2
EFF 1 L/R
EFF 2 L/R
AD 1/2 – AD 7/8
SL1-1/2 – SL1-7/8
SL2-1/2 – SL2-7/8
DIN L/R
*1. Selectable only for return 1
*2. Selectable only for return 2
Tip!
You can use the patch library to save the state of the patch settings you make. For
details refer to page 138.
134
— Operation Guide
1
2
Display
INPUT jacks 1–8
INPUT 1–8 of an I/O card (slot 1)
INPUT 1–8 of an I/O card (slot 2)
L/R channels of the DIGITAL STEREO IN jack
Sampling pads 1–8
Internal metronome
Display
Return from internal effect 1
Return from internal effect 2
INPUT jacks 1/2–7/8
INPUT 1/2–7/8 of an I/O card (slot 1)
INPUT 1/2–7/8 of an I/O card (slot 2)
DIGITAL STEREO IN jack (stereo)
Type of signal
Type of signal
*1
*2