Rcl. Safe Page; Make Fader Recall Safe Settings - Yamaha AW4416 Operation Manual

Make fader recall safe settings

[Function]
Specify the faders that will be excluded from
the recall when a scene is recalled.
[Key operation]
• [SCENE] key [F3] (RCL. Safe) key
• Repeatedly press the [SCENE] key until the
screen shown at the right appears.
[Mouse operation]
M button SCEN button
[Screen functions]
A
RECALL SAFE CHANNEL
If a button in this area is turned on, the fader of
the corresponding channel will maintain its cur-
rent position even when a scene is recalled. The
following channels can be set to Recall Safe sta-
tus.
Input channels 1–24
Monitor channels 1–16
Effect return channels 1/2
Stereo output channel
Tip!
When a scene is recalled, Fader Recall Safe is
valid only if that scene was saved with the
ENABLE parameter 2 set to ENABLE.
Recall Safe settings are not linked for paired
channels. This means that if one channel of a
pair is set to Recall Safe, the faders of the pair
may be in different positions immediately
after a scene is recalled. However even in
this case, moving one of the faders will cause
the other fader to follow immediately.
B
ENABLE
Move the cursor to this button and press the
[ENTER] key to specify whether the Fader Recall
Safe function will be enabled (ENABLE) or not
(DISABLE).

RCL. Safe page

RCL. Safe tab
SCENE screen
1
— Reference Guide
2
127