Setting Page; Make Various Settings For The Current Song - Yamaha AW4416 Operation Manual

SONG screen

Make various settings for the current song

[Function]
Make various settings for the cur-
rent song, such as editing the song
name, selecting the counter dis-
play method, and selecting the
time code frame rate.
[Key operation]
• [SONG] key [F2] (Setting) key
• Repeatedly press the [SONG]
key until the display shown at
the right appears.
[Mouse operation]
M button SONG button
ting tab
[Screen functions]
A
NAME EDIT button
This button edits the song name of the current
song.
B
SONG NAME
This displays the song name of the current song.
C
COMMENT EDIT button
This button edits the comment of the current
song.
D
COMMENT
This displays the comment of the current song.
E
DISPLAY
You can select one of the following three dis-
play methods for the current location that is
shown in the counter/level meter and in the
counter in the upper part of the display.
SECOND button
The counter will be displayed as time (hours/
minutes/seconds/milliseconds).
TIME CODE button
The counter will be displayed as time code
(hours/minutes/seconds/frames/sub-frames).
MEASURE button
The counter will be displayed as measures
(measures/beats/ticks).
2
— Reference Guide

Setting page

1
3
5
7
8
Set-
Tip!
The display method you select here will also
affect how the track editing range is specified
(EDIT screen TR Edit page), and how locate
points are displayed (TRACK screen Mark
Adj. page etc.).
F
PROTECT
This specifies the protect setting of the song.
When you move the cursor to the button in the
PROTECT area and press the [ENTER] key, the
button will alternate between ON and OFF.
When protect is on, it will not be possible to
edit or record tracks, edit the sampling pads, or
set/change locate points.
G
FRAME RATE buttons
Use the following four buttons to select the
frame rate of the time code. The frame rate set-
ting will affect the counter time code display
and the MTC that is transmitted and received.
• 24 button ...........24 fps
• 25 button ...........25 fps
• 30 button ...........30 fps (30 non-drop frame)
• 30D button ........29.97 fps (30 drop-frame)
If you wish to use MTC to synchronize the
AW4416 and an external device, you must
use the FRAME RATE buttons to match the
frame rate of the two devices.
2
4
6
9