Yamaha AW4416 Operation Manual page 89

Chapter5—Recording on the AW4416
2. Turn on the power in the following order: audio sources/SCSI devices
connected to the AW4416
The display of the AW4416 will show the opening screen, and will then change
to the TRACK screen TR View page.
When the power of the AW4416 is turned on, the song you were last operating
will be loaded automatically.
• If the internal hard disk of the AW4416 has not been formatted, a message of
• If a SCSI device is connected to the AW4416, and you turn on the power of the
74
— Operation Guide
"Format OK? [Y (Enter)/N (Any)]" will appear instead of the above screen when
the power is turned on.
AW4416 when the SCSI device is turned off, it may not start up correctly. If the
SCSI device is turned on after the AW4416 is turned on, it will not function
correctly.
the AW4416 monitor system.