Yamaha AW4416 Operation Manual page 79

Chapter3—The user interface of the AW4416
3. Use the [PAN] control, EQ [Q]/[F]/[G] controls, and EQ [HIGH]–
EQ[LOW] keys at the right of the display to adjust the pan and EQ of the
channel that you selected by pressing its [SEL] key.
The controls and keys at the right of the display apply only to the channel that
was last-selected by its [SEL] key.
Tip!
If the VIEW, PAN, EQ, or DYN screens are shown in the display, you can control the
parameters of the channel selected by its [SEL] key.
4. To operate the faders, use the [HOME] key or [AUX 1]–[AUX 8] keys of
the FADER MODE section to select the fader mode (the parameters that
will be controlled by the faders).
The table on the following page shows the parameters controlled by each fader
will change.
64
— Operation Guide
PROFESSIONAL AUDIO WORKSTATION
PAN
EQ
F HI
HI-MID
G
LO-MID
Q LO
FADER MODE
AUX AUX AUX
1 2 3
AUX AUX AUX
5 6 7
EFF 1
HOME
PAN
EQ
HIGH
Q
HI-MID
F
LO-MID
G LOW
FADER MODE
AUX 1 AUX 2 3 AUX 4 AUX
AUX AUX AUX AUX
5 6 7 8
EFF 1 EFF 2
HOME
AUX
4
AUX
8
EFF 2
PROFESSIONAL AUDIO WORKSTATION