Ip Interfaces - Avaya M-MLS User Manual

IP Interfaces

IP interfaces represent the logical connections of the device to the IP nets/
subnets attached to it. Each IP interface corresponds to one net/subnet.
When you create a new IP interface, RIP and OSPF interfaces are
automatically created and assigned enable status. When you delete an IP
interface, the device will delete the associated RIP and OSPF interfaces.
To define and display the IP interfaces, click the
Interfaces
The following parameters are displayed:
Avaya M-MLS Routing Manager User Guide
. The IP Interfaces window appears.
Figure 4-2. IP Interfaces Window
Table 4-2. IP Interface Parameters
Field Name
IP Address
IP NetMask
If Name
Status - Enabled
Description
The IP address assigned to the device on this
subnet.
The IP network mask of the attached net/subnet.
The name of the Layer 2 interface (VLAN) with
which this subnet is associated. Multiple subnets
may be associated with a single VLAN, so multiple
IP interfaces may be associated with the same If
Name.
The status of the IP interface. If checked, the IP
interface is enabled.
IP Route
folder and select
IP Route IP
21